CubeCell Capsule – with MPU9250 9 AXIS Motion Sensor

£35.99

CubeCell Capsule with out any Sensor

Out of stock

Category:

Description

This product is the  Basic CubeCell Capsule and  MPU9250 9 AXIS MOTION SENSOR

The CubeCell Capsule  is the ideal LoRaWAN sensor with a very  small volume of 38cc self-contained  unit, that is  with in an IP67 housing either fully enclosed or with  a Gore-Tex™ gas membrane  to allow  sensed gasses to be detected. The capsule provides for a well-designed LoRaWAN Node that provides all the basic needs to communicate to LoraWAN gateway the sensed information. It is power efficient, easily configured and supports a wide range of “Out the box Sensors” as well as those of your own design.

As a special offer  the  version supplied  by SecureThings.uk, via this site,  is supplied with a O ring seals to provide long-terms weather proof seals,  a fitted 100mAh battery and a USB Debug board  on the basis of one  free per  customer that buy a  CubeCells Capsule.

The key aspects of the Capsule are:

  • Ultra-low power design, 3.5uA in deep sleep via 3.3v supply of 10uA when sleeping  and supplied from  the LiPo battery supplied.
  • Has a 100mAh battery wired for use and is charged before dispatch and requires a sketch to be loaded to take the unit out of long-term sleep. The battery has a typical life of 3 month with transmission of 29 bytes every 5 minutes at SF7.– The unit complies with international regulations regarding transportation by: land or Air or if carried in luggage or sent by post as it is connected to the device and contain  very low level of Lithium.
  • Supports solar energy management, can directly connect with a 5.5~7V solar panel via external connections integrates with a lithium battery management system (charge and discharge management, overcharge protection.
  • Arduino-Compatible  and programming can be carried out using a USB to serial  with correct lead or using the optional Debug board standard sketches available!
  • CE and FCC certification;
  • Based on ASR605x (ASR6501), which integrates the PSoC® 4000 series MCU (ARM® Cortex® M0+ Core) and SX126X (the latest Semtech LoRaWAN chips);
  • LoRaWAN 1.0.3 support;

 

Additional Optional USB  debug  boards  with Micro USB interface with complete ESD protection,  with integrated CP2102 USB to serial port chip, convenient for program downloading, debugging information are avalable.  See  Debug Board

Reviews

There are no reviews yet.

Be the first to review “CubeCell Capsule – with MPU9250 9 AXIS Motion Sensor”

Your email address will not be published.